|
The purpose of Flame Resistant (FR) clothing is to decrease burn injuries and thereby increase the chances of survival and
recovery. No concern can be more important. Wenaas Anti-flame not only meets all the applicable safety standards for
industrial FR fabrics but helps protect workers against flash fires, electric arcs, molten metal splashes, high heat and welding
sparks.
Dale Anti-flame fabrics have been tested against exposures to flash
fires by leading independent test laboratories. These tests
typically involve the use of sensored mannequins and when compared
to garments made with competitive fabrics, Dale Anti-flame shows a
very high degree of protection. (North Carolina State
University Center for Research on Textile Protection and
Comfort)
Just
because you go FR, doesn't mean you have to sacrifice
comfort.
A garment
made from even the safest FR fabric will do little good if it is so
uncomfortable workers neglect to wear it. Most Dale
Anti-flame FR fabrics are 100% cotton. In cold weather cotton
is warmer and in hot weather cooler than most synthetic
fabrics. Unlike most synthetic fabrics, cotton
breathes. It allows humidity to escape and keeps you
dry. The Dale Anti-flame process leaves cotton soft,
breathable and comfortable.
Dale
Anti-flame products are used by workers in the oil and gas
industry, electrical workers and workers in the metal
industry. The flame resistant characteristics of Dale
Anti-flame products have been tested after several years of actual
service with no change in the protective performance. Such
tests have been carried out both in Europe and North America, under
the respective industrial laundering procedures. Dale
Anti-flame textiles can be laundered commercially or home
laundered, and may be dry-cleaned. Do not use chlorine bleach
or acid/sour in the cleaning process.
Dale
Anti-flame offers your employees protection, comfort and value when
the choice must be FR. Since many workers spend most of their
waking hours in work garments, what better choice than Dale
Anti-flame.
|
